VCA12NT Veterinary Monitor

Technical Data

ECG

Lead selection: Standard 5 leads: I, II, III, AVR, AVL, AVF, V

ECG amplification width: 0.05Hz-100 Hz

S-T section monitoring: -2.0mV~2.0mV

Electrode shedding indication: Visual, audible and electric indicate

Scanning speed: 6.25, 12.5, 25, 50mm/SEC

Gain selection: x1/2, x1, x2, x4

ECG calibration: 1mV+5%

Protection Withstand 4000VAC/50Hz voltage isolation;

Alarm: The upper and lower limit of alarm value can be set, automatic memory, and alarm review;

ECG cable:

Standard: Animal specific 3-lead ECG cable

Heart rate:

Detection range of heart rate.0-350bpm

Resolution: 1bpm

Accuracy: ±1%

SpO2

Display: Blood oxygen value, perfusion index, pulse histogram, waveform, pulse value

SpO2 Range: 0%- 100% for large animals or small animals

Resolution: 1%

Accuracy: +2%(Undefined below 70%)

Pulse range: 0-300bpm

Pulse accuracy: ±1bpm

Standard sensors: Special probe for animal tongue and ear

Alarm value: The upper and lower limit of alarm value can be set, automatic memory

NIBP

Measurement method: Digital automatic oscillometric

Measurement parameters: Systolic pressure, Diastolic pressure, Mean pressure, Pulse rate

Working mode: Manual, automatic, and continuous measurement

Unit: mmHg/KPa Optional

Interval time of automatic measurement: 0~250min adjustable

Overvoltage protection: Hardware and software protection

Measurement range: Large animals: 10mmHg, 300mmHg

Small animals: 10mmHg~200mmHg

Cuff pressure range: 0~320mmHg

Standard cuff: 1#, 2#, 3#, 4#t, 5# total 5PCS

Aeration time: Less than 6 seconds

Test vent time: Less than 15 seconds

TEMP

Measurement range: 0°C~50°C

Resolution: 0.1°C

Accuracy: ±0.1°C

Standard probe: Esophagus/rectum probe

Alarm: Upper and lower limit value can be set, automatic memory

RESP

Measurement method: Thoracic impedance

Respiration rate (RR):

A). Measurement range: 0~120bpm

B). Measurement accuracy: ±1bpm or 5%bp

Alarm: Upper and lower limit value can be set, automatic memory

IBP(Optional)

Number of channels: 2

Pressure sensor nominal sensitivity: 5uV/N/mmHg, error ±2%

Pressure sensor input/output impedance: 300Q ~30002

Static pressure measurement range: -50~+ 300mmHg (Up to 350mmHg)

Static pressure measurement error: ±1mmHg or ±1%, greater (Not including probe); ±4mmHg or ±4%, greater (Including probe)

Dynamic pressure measurement range: -50~+300mmHg

Dynamic pressure measurement error: ±4mmHg or±4% of reading(greater)

Vessel types: ART, PA/ CVP/ RAP/ LAP/ ICP

Scope of stress test: ART: 0~300mmHg

AP/ RAP/ LAP/ ICP: -50~120mmHg

Resolution: 1mmHg