VSM30P Veterinary Infusion Pump

$0.00

Model: VSM30P

VSM30P Veterinary Infusion Pump

Feature:
* Scope of Application
* This infusion pump for use in animal hospitals and veterinary stations for constant-rate intravenous infusion of liquid medicines to animals. This infusion pump is suitable for all animal hospitals, veterinary stations and zoos or pet care centre.
* Warning
* This infusion pump is used for animal infusion or injection and is only allowed to be used by professional veterinarians, medical electrical specialists or professionally trained veterinarians. Personnel using this infusion pump should receive adequate training. Any unauthorised person or untrained person shall not carry out any operation.
* Structural Composition and Performance
* The infusion pump is mainly composed of a host and an internal rechargeable battery. The eccentric camshaft is driven by the stepper motor to rotate in working state, so that the slider fixed on it reciprocates up and down according to a certain sequence and movement law, and the IV set is squeezed regularly, so that the liquid in the IV set is oriented at a certain speed rate and all parts are suitable for use in animal environments. Infusion pump functions include Rate mode, history, Anti-bolus, etc. Some parts are optional parts.

Technical Data
Infusion Set Standard	Infusion set used in conjunction with infusion pump should meet the requirements of ISO 8536-4:2019 Infusion equipment for medical use- Part 4: Infusion sets for single use, gravity feed, MOD.
Infusion Lines in the List	The diameter of the tube is Φ3.0-4.5mm, and the double wall thickness of the tube is 0.6-1.0mm.
Rate	Item S: 0.1-1200mL/h Item H: 0.1-2000mL/h or 1-(400*Drip /60) drip/min
Minimum	Item S: 0.01mL/h
increment of Rate	Item H: 0.01mL/h or 1 drip/min
Bolus Rate	Item S: 0.1-1200mL/h Item H: 0.1-2000mL/h
Purge Rate	Item S: 0.1-1200mL/h Item H: 0.1-2000mL/h
VTBI	0.1~9999.99mL, the minimum increment is 0.01mL
Total Volume	0.00～9999.99mL, the minimum increment is 0.01mL
Time	00:01-99:59:59 h:m:s
Standby time range	00:00:01-99:59:59 h:m:s
Select Mode	Item S: Rate Mode Item H: Rate Mode, Time Mode, Body Weight Mode, Sequential Mode
KVO rate	0.1～5.0mL/h, the minimum increment is 0.1mL/h
Anti-bolus switch	On, Off
Occlusion Pressure	3 Levels are adjustable, respectively 300 mmHg, 525 mmHg, 900 mmHg. The error is ±20% or ±113mmHg(15.1kpa),whichever is larger. Maximum occlusion pressure is about 1080mmHg. Note 1: The detected pressure of the infusion system (infusion pump and infusion set) is affected by inner and outer diameter, material, elasticity of the infusion set and other factors. Therefore, infusion sets of different brand and model may differ in the detected pressure range. Note 2: The above declared pressure is based on ANDE and WEGO infusion sets, temperature of 20±2°C.
Unit of Pressure	mmHg, kPa, bar, psi
Bubble Size	1~5 Levels, respectively are (50, 100, 250, 500, 800) μl Sensitivity of single air bubble is 50μl. Note 1: The detected air detection of the infusion system (infusion pump and infusion set) is affected by inner and outer diameter, material, elasticity of the infusion set and other factors. Therefore, infusion sets of different brand and model may differ in the detected air detection. Note 2: The above declared pressure is based on ANDE and WEGO infusion sets, temperature of 20±2°C.
Auto-lock Time	off, 1~5min, the minimum increment is 1min
Reminder Time	off, 1~5min, the minimum increment is 1min
Time Near End	off, 1~30min, the minimum increment is 1min
Bed Number	1-999
Sound	1~8
Brightness	1~8
System Date and Time	System time: _ _ : _ _ System Date: _ _ _ _ : _ _ _ _ Time format: 24 H Date format: yyyy-mm-dd, mm-dd-yyyy or dd-mm-yyyy
System Language	You can select language according to actual needs.
History Record	2000 records above
Infusion Accuracy	Infusion accuracy ±5% Note 1: The infusion accuracy of the infusion system (infusion pump and infusion set) is affected by inner and outer diameter, material, elasticity of the infusion set and other factors. Therefore, infusion sets of different brand and model may differ in the infusion accuracy. Note 2: The above declared pressure is based on ANDE and WEGO infusion sets, temperature of 20±2°C.
Alarm Information	See complete information in 8.5 Alarm Information
Dose of Single Fault	≤1.5mL Note: The above declared single fault is based on ANDE and WEGO infusion sets at a rate of 25mL/h.
Status Indicators	Stop, Infusion, Bolus, KVO, Pause, Standby, Alarm, Purge.
Display	Type: Colorful Touch TFT LCD Dimensions (diagonal): 3.5 inches Resolution: 480*320P
Battery	Internal Battery Number of Batteries: 1 Battery Type: Lithium Ion Battery Shutdown Delay: The pump will be shutdown about 30 minutes start from trigger the alarm after the new battery is running low. Rated Battery Voltage: 11.1VDC Battery Capacity: 2900mAh Power Supply Time: By factory default, continuously operate at a rate of 25mL/h, discharge for at least 9h using a fully charged new battery. Charging: It will keep charging under operating state.
Host LED	Alarm Indicator: 1 (two colors: red, yellow) AC Power Indicator: 1 (green) Battery Status Indicator: 1 (green)
Auditory Indication	Speaker : Produce an alarm, the sound pressure is 55-73 dB(A) and key beep; Support multi-level sound functions; The alarm sound meets the requirements of the IEC60601-1-8.
Interface	Power Supply: One AC power interface, one DC power interface. Other Interfaces: TYPE-C interface
Signal Output	Auxiliary Output Interface Standards Compliant: Meets the requirements of the IEC 60601-1 standard for short-circuit protection and leakage current. Output Impedance: 50Ω
Size	165103100(mm) (L×H×W) (Included Battery)
Weight	Approx. 1.3kg

Infusion Mode	Parameter and Parameter Range
Rate Mode (Item S & Item H)	Item S: 0.1-1200mL/h Item H: 0.1-2000mL/h or 1-(400 x drip/60) drip/min VTBI: 0.1-9999.99mL Time: 00:00:01-99:59:59 h:m:s
Time Mode (Only for Item H)	Rate : Same as Rate Mode VTBI : 0.1-9999.99mL Time : 00:00:01-99:59:59 h:m:s
Body Weight Mode (Only for Item H)	Rate: Same as Rate Mode VTBI : 0.1～9999.99mL Weight : 0.1～300.0kg Drug amt.: 0.1～999.9 Drug amt. unit : Ng, μg, mg, g Volume : 0.1～9999.99mL Dose Rate: 0.01～999.99 Dose Rate Unit: Ng/kg/min, ng/kg/h, ug/kg/min, ug/kg/h, mg/kg/min, mg/kg/h, g/kg/min, g/kg/h
Sequential Mode (Only for Item H)	Several different sequences (parameter group) can be set in Sequential Mode, and the infusion pump infuses according to the set infusion sequence. 5 sequences can be set in this mode. The rate of the current sequence can be changed during the operation process. In Sequential Mode, the VTBI, Rate, and Time are settable, and the ranges of the set values are taken to be the same with Rate Mode. Σ: A sign denotes the total VTBI and the total time of all sequences.

Operating Environment
Working Environment	Temperature: 5 to 40°C Humidity: 15～95%, non-condensing Atmospheric Pressure: 57～106kPa
Storage Environment	Temperature: -20~60ºC Humidity: 10～95%, non-condensing Atmospheric Pressure: 50～106kPa Storage Conditions: Corrosive-free and ventilated indoors
AC Power Specifications	Input Voltage: 100-240V~ Frequency: 50/60Hz Input Current: 0.8-0.3A Fuse: Low breaking, T2AL 250V~
External DC Power Supply	Input Voltage: DC 13V-15V Input Current : 2.3-1.5A

Chongqing vision star is a supplier of professional medical devices, including medical laboratory equipment, surgical equipment, ultrasound machines, radiology equipment, ophthalmology equipment, dental equipment, ENT equipment, obstetrics and gynecology equipment, neonatology equipment, rehabilitation room equipment, beauty equipment, hospital furniture, medical consumables and supplies. You can find a wide range of high quality devices that made in China for hospital or clinic. In the passed 20+ years, we have exported more than 150 countries, provided effective solutions for various types of medical system, and established long term cooperation with distributors and tenders in many countries. We sincerely support every customer with best products, prices, services, and warranty. For distributors and resellers, we can label your own logo on the devices if your order reaches MOQ. We can also help you to source more products that have not been listed on our website. Contact us to get more information.