XMM600I Full Field Digital Mammography System

$0.00

Model: XMM600I

XMM600I Full Field Digital Mammography System

Product usage: a mammogram is a special, low-dose X-ray technique used to take a picture of the breast, detecting and diagnosing any abnormal lumps or masses in breast tissue. It is one of the best tools for the early identification of breast cancer. With early identification, breast cancer can be cured while in the first stage, and recovery is more likely.

IAE tube / 30*24cm detector

Adopt specialized mammography flat panel detector digital imaging technology.

Full size digital mammography x-ray imaging.

Unique adopt all-solid-state high frequency high voltage generator.

The safest mammography at high voltage. There is a built-in X-ray ignition coil in host machine, high-voltage power lines less then 25cm.

Mammography image acquisition control workstation, DICOM 3.0.

Electric Isocentric rotating C-arm with a unique automatic back to center function.

Optional the third generation imported moving grid.

Optional auto/semi-auto/manual, three kind exposure modes.

Optional image output device: digital film printer.

A total of 3 pieces of large size full color LCD screen display, operation table 8 inch LCD screen is a touch key.

Comfortable Compression:

When some degree of pressure is required for radiography, it allows you to presser the appropriate pressure (up to a maximum of 20kg) and is equipped with MICOM Control’s Soft-touch system which is designed to minimize the discomfort of the examine with in the pressure range.

Tissue Compression: Manual and Motorized (Max 20kg) / Compression Force and Thickness Data Display / Micro Control’s Compression / Automatic Release

No.	Configuration	Quantity
1	X-ray Tube	1
2	X-ray Generator	1
3	Gantry assembly	1
4	C-ARM	1
5	Bucky movement device	1
6	Flat panel detector	1
7	Image acquisition workstation	1
8	Review work station	1
9	Paddle switch	2
10	Exposal switch and connected line	1
11	power wire	1
12	grounded wire	1
13	fuse	2
14	operation manual	1
15	Maintenance Reference Manual	1

Item	Parameter		Remark
X-ray Generator	Generator Type: High Frequency Inverter 80kHz		Self-developed All-solid-state high frequency high voltage x-ray generator
	Input Power: Single phase 220VAC, 50/60Hz
	Radiographic Ratings:	Large Focal Point 20-35kV/10-510mAs
		Small Focal Point 20-35kV/10-100mAs
	Power Rating: 6.2kVA
X-ray Tube	Focal Spot Size: Dual Focus 0.1 / 0.3mm		Model：IAE C339V
	Target Material: Molybdenum (Mo)
	Port Material: Beryllium (Be)
	High-speed anode drive: 2800 /10000rpm
	Target angle: 10°/16°
	Anode Heat Storage: 210kJ (300kHU)
	Anode Cooling: Air cooling
	Filtration: Mo（0.03mm）, Al（0.5mm）

Radiographic Stand	C-ARM:	Vertical Movement: 590mm		Electric Isocentric rotating
		Center of electric rotating C-arm
		Automatic return function by one key
	Rotations Degree: +90°～-90°
	Automatically released after the exposure pressure settings display
	Compression flexible, stepless speed.
	Max. pressure: 200N
	Max. travel: 150mm
	SID: 650mm
Flat Panel Detector	Detector material: Amorphous silicon
	Effective coverage of detector: 24x30cm
	Pixel matrix: 3072×1944
	Limit of spatial resolution: 6.0Lp/mm
	DQE value: 70%
	dynamic range: 14bit digital output
	pixel size: 75μm
	High voltage Synchronizer trigger: BNC
	Output: Camera Link or Ethernet
	Working condition: 10℃-40℃
	storage environment: -10℃-50℃
Bucky housing and movement device	Size: 37430465mm
	Stepless speed regulating range: 0～6cm/s
	Movement range: 0.5～2cm
	Grid Size: 24x30cm
	Grid ratio: 5:1
	Grid density: 30lp/cm
	Focal distance: 650mm
Image acquisition workstation	CPU ≥ Intel Core Duo 2.60GHz			Configuration including Diagnose digital workstation 2M medical monitor for optional
	Hardware ≥ 250G high speed Hardware
	Memory ≥ 2G
	Display card ≥ 512MB
	high brightness high-contrast LCD, 1280*1024 Pixel resolution
	Network interface Work – list
	DICOM 3.0 transmission
	100/1000 Gigabit Ethernet
	Software:		Imaging software package DMOC V1.0
Line Voltage	220V ac±10%@25A,Single phase			110V for optional

Chongqing vision star is a supplier of professional medical devices, including medical laboratory equipment, surgical equipment, ultrasound machines, radiology equipment, ophthalmology equipment, dental equipment, ENT equipment, obstetrics and gynecology equipment, neonatology equipment, rehabilitation room equipment, beauty equipment, hospital furniture, medical consumables and supplies. You can find a wide range of high quality devices that made in China for hospital or clinic. In the passed 20+ years, we have exported more than 150 countries, provided effective solutions for various types of medical system, and established long term cooperation with distributors and tenders in many countries. We sincerely support every customer with best products, prices, services, and warranty. For distributors and resellers, we can label your own logo on the devices if your order reaches MOQ. We can also help you to source more products that have not been listed on our website. Contact us to get more information.